SUBSCRIBE

Breaking News on Dairy Processing & Markets

News > R&D

Read more breaking news

 

 

Study on 3D cheese printing offers possibilities

By Jim Cornall+

15-Mar-2017
Last updated on 15-Mar-2017 at 10:34 GMT2017-03-15T10:34:47Z

Researchers in Ireland looked at the properties of 3D processed cheese. Pics: ©iStock/scanrail/Alex Serada
Researchers in Ireland looked at the properties of 3D processed cheese. Pics: ©iStock/scanrail/Alex Serada

A study led by researchers at the School of Food and Nutritional Sciences, University College Cork in Ireland, says 3D printing of processed cheese has implications for customized nutrition.

The findings, published in the Journal of Food Engineering, include the discovery that the printed cheese was softer, less sticky and had increased ‘meltability.’

The 3D printing was investigated using a commercially-available processed cheese as the printing material.

The objective of the research was to understand the influence of the 3D printing process (melting, extrusion and solidification) on the textural, rheological and microstructural properties of commercially-available processed cheese.

Methods

Untreated cheese, melted cheese and printed cheeses (extruded at rates of 4 or 12 mL/min) were investigated.

After melting at 75°C for 12 minutes, the processed cheese was printed using a modified commercial 3D printer at low or high extrusion rates.

Comparative assessment of untreated, melted and printed cheeses was conducted employing texture profile analysis, rheology, colourimetry and confocal laser scanning microscopy (CLSM).

Study results

The study showed both melted and printed cheese samples were significantly less hard, by up to 49%, and both exhibited higher degrees of meltability, ranging from 14% to 21%, compared to untreated cheese samples.

Hardness of cheese was significantly decreased by the combination of melting and printing, with decreases of 45–49% for printed cheeses compared to untreated cheese.

The authors say the shearing effects of the 3D printing process had more significant effects upon the textural properties of processed cheese than the melting process alone.

Disruption of the protein phase, and alteration of fat globules in terms of size and morphology, resulted in softer textures and more easily meltable cheeses, apparently due to a weakening of the protein network.

Higher adhesiveness in printed cheese samples and less sticky properties can be explained by increased quantities of surface fat released while shearing the sample, the researchers noted.

Potential for study

The 3D printing of food, the authors say, offers many possibilities for customized nutrition, including flexibility in geometries, textures and flavors.

However, they noted the fundamental principles underlying how this process affects food microstructures and consequently, sensory attributes, need to be further investigated to allow for greater diversification in more application areas.

 

Effect of 3D printing on the structure and textural properties of processed cheese

Source: Journal of Food Engineering

Authors: Camille Le Tohic, Jonathan J. O'Sullivan, Kamil P. Drapala, Valentin Chartrin, Tony Chan, Alan P. Morrison, Joseph P. Kerry, Alan L. Kelly

http://dx.doi.org/10.1016/j.jfoodeng.2017.02.003

Key Industry Events

 

Access all events listing

Our events, Shows & Conferences...